CSE 322 Fall 2018 Lab 11

January 6, 2019

Simulation lab starts. Lab report has to be submitted.

The list below shows the list of tasks and information to be submitted in the lab report.

Task#1
Installation of Proteus 8.0
Installation process of proteus 8.0

Task#2
Simulation of a 4-bit weighted resistor network DAC with a reference voltage of X Volt, where x is the last 2 digit of your registration number.

  • Simulation of the circuit
  • Analog output voltage for all the digital input combinations from 0000 to 1111
  • Report should also contain all the theoretical values and comparison of the discrepancies between theoretical values and simulation results.

Task #3
Simulation of a 8-bit weighted resistor network DAC a reference voltage of X Volt, where x is the last 2 digit of your registration number.

  • Simulation of the circuit
  • Analog output voltage for all the digital input combinations from 00000000 to 11111111
  • Report should also contain all the theoritical values and comparison of the discrepancies between theoretical values and simulation results.

Task#4
Simulation of a 4-bit R-2R ladder DAC with a reference voltage of X Volt, where x is the last 2 digit of your registration number.

  • Simulation of the circuit
  • Analog output voltage for all the digital input combinations from 0000 to 1111
  • Report should also contain all the theoretical values and comparison of the discrepancies between theoretical values and simulation results.

Task#5
Simulation of a 8-bit R-2R ladder DAC with a reference voltage of X Volt, where x is the last 2 digit of your registration number.

  • Simulation of the circuit
  • Analog output voltage for all the digital input combinations from 00000000 to 11111111
  • Report should also contain all the theoretical values and comparison of the discrepancies between theoretical values and simulation results.

Report

  • Your report should contain all the task details mentioned above along with screenshot of the circuit and theory of operation of the circuit.
  • The report should contain detailed discussions on the learnings from this lab and about each experiments.
  • Hard copy of the report must be submitted before 17th december 2018.
  • Soft copy of the report along with all the simulation files should be submitted at the end of the semester along with project, project report.

Any plagiarism will be heavily penalized.

Leave a Reply