CSE 322 Fall 2018 Lab 12

January 6, 2019

Simulation lab 2. Lab report has to be submitted.

The list below shows the list of tasks and information to be submitted in the lab report.

Task#1
Simulation of a 3-bit Flash ADC with a reference voltage of X Volt, where x is the last 2 digit of your registration number.

  • Simulation of the circuit
  • Report should also contain all the theoretical values and comparison of the discrepancies between theoretical values and simulation results.
  • Analog input voltage necessary for the digital output combinations from 000 to 111

 

Task#2
Simulation of a 4-bit Flash ADC with a reference voltage of X Volt, where x is the last 2 digit of your registration number.

  • Simulation of the circuit
  • Report should also contain all the theoretical values and comparison of the discrepancies between theoretical values and simulation results.
  • Analog input voltage necessary for the digital output combinations from 0000 to 1111

Task #3
Simulation of a 3-bit Flash ADC without encoder (See Lecture sheet for reference). Use reference voltage of X Volt, where x is the last 2 digit of your registration number.

  • Simulation of the circuit
  • Report should also contain all the theoretical values and comparison of the discrepancies between theoretical values and simulation results.
  • Analog input voltage necessary for the digital output combinations from 000 to 111

 

Report

  • Your report should contain all the task details mentioned above along with screenshot of the circuit and theory of operation of the circuit.
  • The report should contain detailed discussions on the learnings from this lab and about each experiments.
  • Hard copy of the report must be submitted before Lab exam.
  • Soft copy of the report along with all the simulation files should be submitted at the end of the semester along with project, project report.

Any plagiarism will be heavily penalized.

Print Friendly, PDF & Email

Leave a Reply